Cisco Telepresence MX800 - Packaging

78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Installation guide for Cisco TelePresence MX800 Dual - Floor stand
Page 3
Packaging
1
Open the plastic snap locks and remove the side walls.
2
Lay the box marked with F-J+L+M flat on the floor. Remove
the lid. Boxes F to J, L and M are inside.
Lay the box marked with A and B+C+E+K flat on the floor.
Remove the lid. Boxes B, C, E and K are inside.
Boxes are labeled A to M. This guide
refers to the labels.
A M
...
B+E-G
Shows which boxes are inside.
Tools and screws are in this box.
F-J+L+M B+C+E+K A
D
D