7-89
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
show cts policy peer
show cts policy peer
To display the peer authorization policy data of TrustSec peers, use the show cts policy peer command
in EXEC or privileged EXEC mode.
show cts policy peer
Syntax Description This command has no commands or keywords.
Defaults None
Command Modes EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History
Examples The following example displays the TrustSec peer authorization policy of all peers:
VSS-1# show cts policy peer
CTS Peer Policy
===============
Peer name: VSS-2T-1
Peer SGT: 1-02
Trusted Peer: TRUE
Peer Policy Lifetime = 120 secs
Peer Last update time = 12:19:09 UTC Wed Nov 18 2009
Policy expires in 0:00:01:51 (dd:hr:mm:sec)
Policy refreshes in 0:00:01:51 (dd:hr:mm:sec)
Cache data applied = NONE
Release Modification
12.2(33) SXI This command was introduced on the Catalyst 6500 series switches.
Output Field Explanation
Peer name CTS device-id of the peer to which the local device is
connected.
Peer SGT The Security Group Tag of the peer.
Trusted Peer TRUE—The local device trusts the SGT tagged in the
packet coming from this peer.
FALSE—The device does not trust the SGT tagged in the
packet coming from this peer.
Peer Policy Lifetime The length of time this policy is valid before it is refreshed.
Peer Last update time The time when this policy was last refreshed
To Next Page
Loading...
