Cisco UCS 6332

SFP Fibre Channel Transceivers
The Cisco UCS 6332-16UP Fabric Interconnect supports the SFP Fibre Channel transceivers listed below.
These transceivers are not supported on the UCS 6332 Fabric Interconnect.
Table 6: SFP Fiber Channel Transceivers
DescriptionModel
4 Gbps Fibre Channel-SW SFP, LCDS-SFP-FC4G-SW
8-Gbps Fibre Channel SW SFP+, LCDS-SFP-FC8G-SW
8-Gbps Fibre Channel LW SFP+, LCDS-SFP-FC8G-LW
16-Gbps Fibre Channel SW SFP+, LCDS-SFP-FC16G-SW
The maximum length of fiber optic runs from the fabric interconnect to a chassis is limited to 300 meters.
This restriction is imposed by the use of 802.3X/802.1Qbb Priority Pauses.
Note
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
16
Product Overview
SFP Fibre Channel Transceivers