CHAPTER 2
Installing the Cisco UCS 6300 Series Fabric
Interconnect
• Preparing for Installation, on page 17
• Cabinet and Rack Requirements, on page 20
• Cable Management Guidelines, on page 22
• Required Equipment, on page 22
• Unpacking and Inspecting the Cisco UCS Fabric Interconnect, on page 22
• Installing the Cisco UCS Chassis or UCS Chassis in a Cabinet or Rack, on page 23
• Grounding the System, on page 27
• Starting the System, on page 32
• Replacing or Installing Components, on page 34
• Repacking the Cisco UCS Fabric Interconnect for Return Shipment, on page 43
Preparing for Installation
Considerations and Warnings
Before you install, operate, or service the system, read the Regulatory Compliance and Safety Information
for Cisco UCS for important safety information.
Note
IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that
could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided
at the end of each warning to locate its translation in the translated safety warnings that accompanied this
device. Statement 1071
Warning
SAVE THESE INSTRUCTIONS
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
17
To Next Page
Loading...
