EasyManuals Logo

Cisco UCS 6332 User Manual

Cisco UCS 6332
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning
Only trained and qualified personnel must be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Each new fabric interconnect requires a license. For information on licensing, see the Configuration Guide
for the version of Cisco UCS Manager that you are using. The configuration guides are available at the
following URL:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
Note
Installation Options
You can install the Cisco UCS Fabric Interconnect chassis in a perforated or solid-walled EIA cabinet or an
open EIA rack (the Cisco R Series Rack is an ideal choice), using the rack-mount kit shipped with the chassis.
For instructions on installing the chassis using the rack-mount kit shipped with the chassis, see Installing the
Cisco UCS Chassis or UCS Chassis in a Cabinet or Rack, on page 23.
Airflow Considerations
The FI's cooling fans pull air front-to-rear. That is, air intake is on the fan side and air exhaust is on the port
side.
To ensure proper airflow, follow these guidelines:
Maintain ambient airflow throughout the data center to ensure normal operation.
Consider the heat dissipation of all equipment when determining air conditioning requirements. When
evaluating airflow requirements, take into consideration that hot air generated by equipment at the bottom
of the rack can be drawn in the intake ports of the equipment above.
Ensure that exhaust airflow is unobstructed.
Chassis Weight
When lifting the system, follow these guidelines:
Disconnect all power and external cables before lifting the system.
Have two people to lift the system. The Cisco UCS 6332 weighs 22 pounds (9.9 kg). The Cisco UCS
6332 16-UP weighs 22.61 pounds (10.2 kg). The Cisco UCS 6454 weighs 25.9 pounds (11.7 kg)
Ensure that your footing is solid and that the weight of the system is evenly distributed between your
feet.
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
18
Installing the Cisco UCS 6300 Series Fabric Interconnect
Installation Options

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS 6332 and is the answer not in the manual?

Cisco UCS 6332 Specifications

General IconGeneral
Switching Capacity2.56 Tbps
Form Factor1 RU
Product TypeFabric Interconnect
Input Voltage100-240 VAC
ManagementCisco UCS Manager
Power SupplyDual hot-swappable power supplies
Jumbo Frame SupportSupported
Fans4 hot-swappable fans
LatencyLess than 1 microsecond

Related product manuals