Cisco UCS C24 M3 User Manual

Cisco UCS C24 M3 High-Density SFF Rack-Mount Server
BASE SERVER STANDARD CAPABILITIES and FEATURES
7
External Storage
Devices
■ A 16 GB USB 2.0 drive (if ordered) comes as a separate item in the
shipping box and contains preloaded drivers and utilities. You can move
the 16 GB drive from one server to another an using external USB 2.0
connector in order to install the drivers and utilities onto multiple
servers.
Video The Emulex Pilot 3 Integrated Baseboard Management Controller provides
video:
■ Matrox G200e video controller
■ Integrated 2D graphics core with hardware acceleration
■ Supports all display resolutions up to 1920 x 1200 x 16 bpp resolution at
60 Hz
■ 24-bit color depth for all resolutions less than 1600x1200
■ Up to 256 MB video memory
Interfaces ■ Rear panel
• One DB9 serial port connector
• Four USB 2.0 port connectors
• One DB15 VGA connector
• One 10/100/1000 Ethernet management port
• Two 1 GbE Ethernet LOM ports
■ Front panel
•Two USB 2.0 ports
Front Panel ■ A front panel controller provides status indications and control buttons
Power subsystem One or two power supplies, depending on server configuration and loading.
Power supplies available are 450 W or 650 W (no mixing). With two power
supplies, 1 + 1 redundancy is provided if the load can be carried with one
supply. Prior to making a power supply selection, the UCS Power Calculator
should be run to determine the right size power supply for your server
configuration. The UCS Power Calculator can be found at the following link:
https://express.salire.com/Go/Cisco/Cisco-UCS-Power-Calculator.aspx
Fans Chassis:
■ Four hot-swappable fans for front-to-rear cooling. N + 1 redundant.
Power supply:
■ The power supplies are equipped with fans.
Integrated management
processor
Cisco Integrated Management Controller (CIMC).
Depending on your CIMC settings, the CIMC can be accessed through the 1-Gb
Ethernet dedicated management port, the 1-Gb Ethernet LOM ports, or a
Cisco 1225 virtual interface card.
Notes . . .
1. NCSI = network communications services interface protocol. The slot stays active when the server is in standby
power state.
2. CNIC = Cisco network interface card.
Capability/Feature Description

Cisco UCS C24 M3 Specifications

General

Brand	Cisco
Model	UCS C24 M3
Category	Server
Language	English