EasyManuals Logo

Cisco UCS C24 M3 User Manual

Cisco UCS C24 M3
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Cisco UCS C24 M3 High-Density SFF Rack-Mount Server
6
BASE SERVER STANDARD CAPABILITIES and FEATURES
BASE SERVER STANDARD CAPABILITIES and FEATURES
Tab le 1 lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in
CONFIGURING the SERVER, page 8.
Table 1 Capabilities and Features
Capability/Feature Description
Chassis Two rack unit (2RU) chassis
CPU Two Intel® Xeon E5-2400 series processor family CPUs
Chipset Intel C600 chipset
Memory 12 DIMM slots
NIC Embedded dual-port Intel I350 PCIe-based Gigabit Ethernet controller
Expansion slots Two riser cards containing PCIe card slots
Riser 1 (controlled by CPU 1)
One x16 PCIe Gen 3 slot, x16 extended connector (Cisco CNIC),
half-length, full-height, with NCSI
1
and Cisco CNIC
2
support. The
Cisco 1225 virtual interface card requires an NCSI slot.
One x4 PCIe Gen 3 slot, x8 connector, half-length, full-height, no
NCSI support
Riser 2 (controlled by CPU 2)
One x8 PCIe Gen 3 slot, x16 connector, half-length, half-height
One x8 PCIe Gen 3 slot, x8 connector, half-length, half-height
One x8 PCIe Gen 3 slot, x8 connector, half-length, half-height
Storage controller The 24-drive version of the server supports the following RAID
controllers:
RAID plug-in controller card options (these cards consume PCIe slots):
LSI MegaRAID 9265CV-8i (with 1 GB Transportable Memory Module
(TMM) data cache and SuperCap for data cache power backup)
LSI MegaRAID 9240-8i
LSI MegaRAID 9220-8i
The server backplane configuration is as follows:
A 24-drive backplane with an expander. With this backplane, the
9265CV-8i controller supports up to 24 internal drives and the 9240-8i
and 9220-8i controllers each support up to 16 internal drives.
Internal storage devices With the 24-drive backplane, up to 24 2.5-inch SAS or SATA
hot-swappable hard disk drives (HDDs)
One connector on the motherboard that can accommodate a USB 2.0
drive. You can order an 8 GB drive for this connector and use it as a
hypervisor or license dongle. The 8 GB USB drive comes blank.

Other manuals for Cisco UCS C24 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS C24 M3 and is the answer not in the manual?

Cisco UCS C24 M3 Specifications

General IconGeneral
BrandCisco
ModelUCS C24 M3
CategoryServer
LanguageEnglish

Related product manuals