Cisco UCS C24 M3 - CONFIGURING the SERVER

Cisco UCS C24 M3 High-Density SFF Rack-Mount Server
8
CONFIGURING the SERVER
CONFIGURING the SERVER
Follow these steps to configure the Cisco UCS C24 M3 High-Density SFF Rack Server:
■ STEP 1 VERIFY SERVER SKU, page 9
■ STEP 2 SELECT CPU(s), page 10
■ STEP 3 SELECT MEMORY, page 11
■ STEP 4 SELECT RAID CONFIGURATION, page 14
■ STEP 5 SELECT HARD DISK DRIVES (HDDs), page 17
■ STEP 6 SELECT PCIe OPTION CARD(s), page 19
■ STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES, page 21
■ STEP 8 SELECT AC POWER CORD(s), page 24
■ STEP 9 ORDER POWER SUPPLIES, page 27
■ STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM, page 28
■ STEP 11 ORDER A TRUSTED PLATFORM MODULE, page 29
■ STEP 12 ORDER OPTIONAL USB 2.0 DRIVES, page 30
■ STEP 13 SELECT OPERATING SYSTEM, page 31
■ STEP 14 SELECT OPERATING SYSTEM MEDIA KIT, page 33
■ STEP 15 SELECT OPTIONAL VALUE-ADDED SOFTWARE, page 34
■ STEP 16 SELECT SERVICE and SUPPORT LEVEL, page 35
■ OPTIONAL STEP - ORDER RACK(s), page 39
■ OPTIONAL STEP - ORDER PDU, page 40