Basic Setup
Use the Setup screen to define the Internet Protocol (IP) configuration for your
device.
1 Choose your Dynamic Host Configuration Protocol (DHCP) option per the
following guidelines:
Enabled: If your network includes a DHCP server for dynamic allocation of
IP addresses, choose this option if you want DHCP to assign an IP address
and subnet mask to the device. Depending on your router, the default
gateway, primary DNS server, and secondary DNS server may also be
assigned.
Disabled: Choose this option if you want to manually enter IP configuration
information.
2 Did you select the Disabled option?
If yes, complete the fields on the screen per the following guidelines:
– Internet IP Address: If you configure the device for a static IP address,
enter that IP address.
– Subnet Mask: If you configure the device for a static IP address, enter the
subnet mask. Use the same value that is configured for the personal
computers (PCs) on your network.
– Default Gateway: If you configure the device for a static IP address, enter
the gateway IP address. Use the same value that is configured for the PCs
on your network.
To Next Page
Loading...
Need help?
General
