Wireless Setup
Basic Wireless Settings
Use the Basic Settings screen to the wireless interface for your device.
1 If you are configuring a VEN402 client device, you may enter the Network Name
(SSID) for the wireless network you want to join in the field provided.
Otherwise, go to step 2.
2 From the Wireless Network Wireless Interface field, select which wireless
interface you want to configure.
3 Do you have any Wireless-N (5GHz) devices in your network?
If yes, select Enabled for the Interface field to run wireless on your network.
If no, select Disabled.
To Next Page
Loading...
