Chapter 2 Web-Based User Interface
5 Click the Save Settings button to apply your changes or Cancel Changes button
to cancel.
Security Settings
Use this screen to configure the security of your wireless network.
Complete the following steps to select a security mode for a specific BSSID.
1 Are you configuring a VEN401 or VEN402 device?
If you are configuring a VEN401, select the wireless BSSID interface you wish
to configure from the Select BSSID drop-down menu.
If you are configuring a VEN402, the Network Name (SSID) field appears in
a non-editable field.
2 Select the Security Mode setting desired per the guidelines below:
Off—This option turns the security feature off. Off: This option features no
security on your wireless network. If you select this option, skip to the last
step.
Note: Some countries require by law for wireless networks to be secured.
Cisco is not responsible for users who do not adhere to country-specific
regulations. Contact your service provider to find out what your country
requires.
WEP—WEP is a basic encryption method, which is not as secure as the other
methods available.
WPA-Personal—This method offers three encryption methods, TKIP, AES,
and TKIP or AES, with dynamic encryption keys.
To Next Page
Loading...
Need help?
General
