WPA2-Personal—WPA2-Personal is a stronger encryption method than
WPA-Personal. This method offers three encryption methods, TKIP, AES,
and TKIP or AES, with dynamic encryption keys.
Mixed WPA2 Personal/WPA Personal—This options supports both WPA
and WPA2 clients.
3 Did you select WEP?
If yes, continue with the WEP Settings (on page 17) section to complete your
security setup.
If no, continue with the Other Security Mode Settings (on page 18) section to
complete your security setup.
4 Click the Save Settings button to apply your changes or Cancel Changes button
to cancel.
WEP Settings
Complete the following steps if you select WEP for the Security Mode.
1 Select a level of WEP encryption, 40/64-bit (10 hex digits) or 104/128-bit (26 hex
digits).
2 If you want to use a Passphrase to automatically generate WEP keys?
If yes, enter the Passphrase in the field field and click the Generate button.
Skip to the last step.
Note: The WEP Passphrase is compatible with Cisco wireless products only.
If you are using non-Cisco products, manually enter the appropriate WEP
key on those devices.
To Next Page
Loading...
Need help?
General
