TPC Mitigation (db): Power Mitigation factor (in db).
WMM Support: The device supports Wi-Fi Multimedia (WMM) for Quality
of Service (QoS). When WMM Support is enabled, it provides four priority
queues for different types of traffic. It automatically maps the incoming
packets to the appropriate queues based on QoS settings (in the IP or layer 2
header). WMM provides the capability to prioritize traffic in your
environment. If you have other devices on your network that support WMM,
select On. The default is On.
No-Acknowledgement: When enabled, wireless devices will not
acknowledge each transmitted packet. This may cause more efficient
throughput in low RF noise environments, but will degrade performance in
noisy environments. The default is Off.
APSD Support: Automatic Power Save Delivery (APSD) is a special power-
saving mode to achieve end-to-end QoS. This option is available if you
enabled WMM Support. Select On to enable Automatic Power Save Delivery
(APSD) or Off to disable this feature.
6 Click the Apply button to apply your changes or Cancel button to cancel.
Multiple SSID Settings
The Multiple SSID Settings screen allows you to manage your wireless network if
your Access Point will be used to support multiple stations.
Note: The mutiple SSID parameters are applicable only to the VEN401 Access Point
device. The VEN402 client device does not support multiple SSIDs.
To Next Page
Loading...
Need help?
General
