MAC Filter Settings
Wireless access can be filtered by using the MAC addresses of the wireless devices
transmitting within your network.
1 From the Select BSSID field, select the device you want to configure.
2 Do you want to use the Wireless MAC Filter feature for the device selected?
a If yes, select Enabled and continue with step 3.
b If no, select Disabled and skip to the last step.
3 Select the Access Restriction method you want to use as follows:
Filter As White List - Select this option to allow only PCs whose MAC
addresses are listed on this screen access to the wireless network.
Filter As Black List - Select this option to block the PCs whose MAC
addresses are listed on this screen from accessing the wireless network.
4 Enter the MAC Addresses whose wireless access you want to control in the fields
provided.
To Next Page
Loading...
