Cisco WAP150 - Dashboard; Monitor

CHAPTER 10
Monitor
This chapter describes how to display status and statistics of the WAP device. It contains the following topics:
• Dashboard, on page 107
• Single Point Setup Status, on page 110
• Clients, on page 111
• Guests, on page 113
Dashboard
The Dashboard displays the throughput status, and provides you with easy steps to configure or monitor your
network device. This page is updated every 30 seconds.
Connected Clients
The total number of clients currently associated with the WAP device. Click the box, to be redirected to the
Clients page.
Internet/LAN/Wireless
Round icons on the top right of the page, show Internet, LAN and wireless connection status.
Internet
• Red round — No Internet connection.
• Green round — Internet connection is good.
LAN
• Red round — No wired connection.
• Green round — Wired connection.
Click the LAN link to view the LAN Status page.
Wireless
• Red round — All radios are disabled.
• Green round — At least one radio is working. One or two radios are enabled.
Click the Wireless link to view the Wireless Status page.
Cisco WAP150 Wireless-AC/N Dual Radio Access Point with PoE / Cisco WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE
107