Cisco WAP351 - Page 24

Status and Statistics
Network Interfaces
Cisco WAP131 and WAP351 Administration Guide 24
2
- Description—Description of the VLAN.
- LAN1-LAN5—Ethernet interface status of the VLAN.
Click the Edit link to change any of these settings. You will be redirected to
the VLAN Configuration page.
• Radio Status—Displays information for the wireless radio interfaces,
including:
- Wireless Radio—The wireless radio mode is enabled or disabled for
the radio interface.
- MAC Address—The MAC address associated with the radio interface.
- Mode—The 802.11 mode (a/b/g/n) used by the radio interface.
- Channel—The channel used by the radio interface.
- Operational bandwidth—The operational bandwidth used by the radio
interface.
Click the Edit link to change any of these settings. You will be redirected to
the Radio page.
• Interface Status—Displays status information for each Virtual Access Point
(VAP) and on each Wireless Distribution System (WDS) interface, including:
- Interface—The wireless interface of the WAP device.
- Name (SSID)—The wireless interface name.
- Status—The administrative status (up or down) of the VAP.
- MAC Address— The MAC address of the radio interface.
- VLAN ID—The VLAN ID of the radio interface.
- Profile—The name of any associated scheduler profile.
- State—The current state (active or inactive). The state indicates whether
the VAP is exchanging data with a client.
You can click Refresh to refresh the screen and show the most current information.