Cisco WAP351 - HTTP;HTTPS Service; Configuring HTTP and HTTPS Services

Administration
HTTP/HTTPS Service
Cisco WAP131 and WAP351 Administration Guide 45
3
Data Encryption: TLSv1
SMTP Server: smtp.live.com
SMTP Port: 587
Username: Your full email address, such as myName@hotmail.com or
myName@myDomain.com
Password: Your Windows Live account password
Yahoo! Mail
Yahoo requires using a paid account for this type of service. Yahoo
recommends the following settings:
Data Encryption: TLSv1
SMTP Server: plus.smtp.mail.yahoo.com
SMTP Port: 465 or 587
Username: Your email address, without the domain name such as myName (without
@yahoo.com)
Password: Your Yahoo account password
The following example shows a sample format of a general log email.
From: AP-192.168.2.10@mailserver.com
Sent: Wednesday, September 09, 2009 11:16 AM
To: administrator@mailserver.com
Subject: log message from AP
TIME PriorityProcess Id Message
Sep 8 03:48:25 info login[1457] root login on ttyp0
Sep 8 03:48:26 info mini_http-ssl[1175] Max concurrent connections of 20
reached
HTTP/HTTPS Service
Use the HTTP/HTTPS Service page to enable and configure the web-based
management connections. If HTTPS is used for secure management sessions, you
can also use this page to manage the required SSL certificates.
Configuring HTTP and HTTPS Services
To configure the HTTP and HTTP services:
STEP 1 Select Administration > HTTP/HTTPS Service.
STEP 2 In the Global Settings area, configure these parameters:
• Maximum Sessions—Enter the number of web sessions, including both
HTTP and HTTPS, that can be in use at the same time.