6-3
Cisco 2900 Series and 3900 Series Hardware Installation Guide
OL-18712-02
Chapter 6 Getting Software Licenses for the Router
RMA License Transfer
RMA License Transfer
To transfer a software license from a failed device to a new device, go to the Cisco licensing portal at:
http://www.cisco.com/go/license.
Note
You need the SN and PID of the defective device and the RMA router, to initiate an RMA replacement
license.
Additional Information
See the Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers
Generation 2 document at Cisco.com for detailed information about software activation on Cisco ISR
G2 platforms.
To Next Page
Loading...
