Cisco WS-C2960-24LC-S User Manual

Contents
xvii
Catalyst 2960 Switch Software Configuration Guide
OL-8603-04
Default Storm Control Configuration 19-3
Configuring Storm Control and Threshold Levels 19-3
Configuring Protected Ports 19-5
Default Protected Port Configuration 19-6
Protected Port Configuration Guidelines 19-6
Configuring a Protected Port 19-6
Configuring Port Blocking 19-7
Default Port Blocking Configuration 19-7
Blocking Flooded Traffic on an Interface 19-7
Configuring Port Security 19-8
Understanding Port Security 19-8
Secure MAC Addresses 19-8
Security Violations 19-9
Default Port Security Configuration 19-10
Port Security Configuration Guidelines 19-10
Enabling and Configuring Port Security 19-11
Enabling and Configuring Port Security Aging 19-16
Displaying Port-Based Traffic Control Settings 19-17
CHAPTER 20 Configuring CDP 20-1
Understanding CDP 20-1
Configuring CDP 20-2
Default CDP Configuration 20-2
Configuring the CDP Characteristics 20-2
Disabling and Enabling CDP 20-3
Disabling and Enabling CDP on an Interface 20-4
Monitoring and Maintaining CDP 20-4
CHAPTER 21 Configuring LLDP and LLDP-MED 21-1
Understanding LLDP and LLDP-MED 21-1
Understanding LLDP 21-1
Understanding LLDP-MED 21-2
Configuring LLDP and LLDP-MED 21-3
Default LLDP Configuration 21-3
Configuring LLDP Characteristics 21-4
Disabling and Enabling LLDP Globally 21-5
Disabling and Enabling LLDP on an Interface 21-5
Configuring LLDP-MED TLVs 21-6

Cisco WS-C2960-24LC-S Specifications

General

Brand	Cisco
Model	WS-C2960-24LC-S
Category	Network Router
Language	English