Cisco WS-C2960-24LC-S User Manual

Contents
xxii
Catalyst 2960 Switch Software Configuration Guide
OL-8603-04
Configuring the Ingress Priority Queue 28-61
Configuring Egress Queue Characteristics 28-62
Configuration Guidelines 28-62
Allocating Buffer Space to and Setting WTD Thresholds for an Egress Queue-Set 28-62
Mapping DSCP or CoS Values to an Egress Queue and to a Threshold ID 28-65
Configuring SRR Shaped Weights on Egress Queues 28-66
Configuring SRR Shared Weights on Egress Queues 28-67
Configuring the Egress Expedite Queue 28-68
Limiting the Bandwidth on an Egress Interface 28-68
Displaying Standard QoS Information 28-69
CHAPTER 29 Configuring IPv6 Host Functions 29-1
Understanding IPv6 29-1
IPv6 Addresses 29-2
Supported IPv6 Unicast Routing Features 29-3
128-Bit Wide Unicast Addresses 29-3
DNS for IPv6 29-4
ICMPv6 29-4
Neighbor Discovery 29-4
IPv6 Stateless Autoconfiguration and Duplicate Address Detection 29-4
IPv6 Applications 29-5
Dual IPv4 and IPv6 Protocol Stacks 29-5
SDM Templates 29-6
Dual IPv4-and-IPv6 SDM Templates 29-7
Configuring IPv6 29-7
Default IPv6 Configuration 29-8
Configuring IPv6 ICMP Rate Limiting 29-8
Configuring Static Routes for IPv6 29-9
Displaying IPv6 29-11
CHAPTER 30 Configuring IPv6 MLD Snooping 30-1
Understanding MLD Snooping 30-1
MLD Messages 30-2
MLD Queries 30-3
Multicast Client Aging Robustness 30-3
Multicast Router Discovery 30-3
MLD Reports 30-4
MLD Done Messages and Immediate-Leave 30-4
Topology Change Notification Processing 30-5

Cisco WS-C2960-24LC-S Specifications

General

Brand	Cisco
Model	WS-C2960-24LC-S
Category	Network Router
Language	English