Contents
xxvi
Catalyst 2960 Switch Software Configuration Guide
OL-8603-04
Working with Software Images B-23
Image Location on the Switch B-24
tar File Format of Images on a Server or Cisco.com B-24
Copying Image Files By Using TFTP B-25
Preparing to Download or Upload an Image File By Using TFTP B-26
Downloading an Image File By Using TFTP B-27
Uploading an Image File By Using TFTP B-28
Copying Image Files By Using FTP B-29
Preparing to Download or Upload an Image File By Using FTP B-29
Downloading an Image File By Using FTP B-30
Uploading an Image File By Using FTP B-32
Copying Image Files By Using RCP B-33
Preparing to Download or Upload an Image File By Using RCP B-33
Downloading an Image File By Using RCP B-35
Uploading an Image File By Using RCP B-37
B-38
APPENDIX
C Recommendations for Upgrading a Catalyst 2950 Switch to a Catalyst 2960 Switch C-1
Configuration Compatibility Issues C-1
Feature Behavior Incompatibilities C-5
APPENDIX
D Unsupported Commands in Cisco IOS Release 12.2(40)SE D-1
Access Control Lists D-1
Unsupported Privileged EXEC Commands D-1
Unsupported Global Configuration Commands D-1
Unsupported Route-Map Configuration Commands D-1
Boot Loader Commands D-2
Unsupported User EXEC Commands D-2
Unsupported Global Configuration Commands D-2
Embedded Event Manager D-2
Unsupported Privileged EXEC Commands D-2
Unsupported Global Configuration Commands D-2
Unsupported Commands in Applet Configuration Mode D-2
Debug Commands D-2
Unsupported Privileged EXEC Commands D-2
|IGMP Snooping Commands D-3
Unsupported Global Configuration Commands D-3
To Next Page
Loading...
Need help?
General
