Cisco WS-C2960-24LC-S

Index
IN-6
Catalyst 2960 Switch Software Configuration Guide
OL-8603-04
configuration files (continued)
obtaining with DHCP
3-7
password recovery disable considerations 8-5
replacing a running configuration B-19, B-20
rolling back a running configuration B-19, B-20
specifying the filename 3-12
system contact and location information 26-15
types and location B-10
uploading
preparing
B-10, B-13, B-16
reasons for B-9
using FTP B-14
using RCP B-18
using TFTP B-12
configuration logger 25-10
configuration logging 2-5
configuration replacement B-19
configuration rollback B-19, B-20
configuration settings, saving 3-10
configure terminal command 10-5
config-vlan mode 2-2, 12-6
conflicts, configuration 32-11
connections, secure remote 8-33
connectivity problems 32-12, 32-14, 32-15
consistency checks in VTP Version 2 13-4
console port, connecting to 2-10
control protocol, IP SLAs 27-3
conventions
command
xxx
for examples xxx
publication xxx
text xxx
corrupted software, recovery steps with Xmodem 32-2
CoS
in Layer 2 frames
28-2
override priority 14-6
trust priority 14-6
CoS input queue threshold map for QoS 28-15
CoS output queue threshold map for QoS 28-18
CoS-to-DSCP map for QoS 28-52
counters, clearing interface 10-19
crashinfo file 32-21
critical authentication, IEEE 802.1x 9-33
cryptographic software image
SSH
8-33
SSL 8-37
CWDM SFPs 1-17
D
daylight saving time 6-13
debugging
enabling all system diagnostics
32-19
enabling for a specific feature 32-18
redirecting error message output 32-19
using commands 32-18
default commands 2-4
default configuration
802.1x
9-19
auto-QoS 28-20
banners 6-17
booting 3-12
CDP 20-2
DNS 6-16
EtherChannel 31-9
Ethernet interfaces 10-9
IGMP filtering 18-24
IGMP snooping 18-6, 30-5, 30-6
IGMP throttling 18-24
initial switch information 3-3
IP SLAs 27-5
IPv6 29-8
Layer 2 interfaces 10-9
LLDP 21-3
MAC address table 6-21
MSTP 16-14
MVR 18-19
NTP 6-4