Index
IN-27
Catalyst 2960 Switch Software Configuration Guide
OL-8603-04
SNMP (continued)
MIBs
location of
A-3
supported A-1
notifications 26-5
overview 26-1, 26-4
security levels 26-3
status, displaying 26-18
system contact and location 26-15
trap manager, configuring 26-14
traps
described
26-3, 26-5
differences from informs 26-5
disabling 26-15
enabling 26-12
enabling MAC address notification 6-22
overview 26-1, 26-5
types of 26-12
users 26-7, 26-10
versions supported 26-2
SNMPv1 26-2
SNMPv2C 26-2
SNMPv3 26-2
snooping, IGMP 18-1
software images
location in flash
B-24
recovery procedures 32-2
scheduling reloads 3-16
tar file format, described B-24
See also downloading and uploading
source-and-destination-IP address based forwarding,
EtherChannel
31-7
source-and-destination MAC address forwarding,
EtherChannel
31-6
source-IP address based forwarding, EtherChannel 31-7
source-MAC address forwarding, EtherChannel 31-6
SPAN
configuration guidelines
23-10
default configuration 23-9
destination ports 23-6
displaying status 23-22
interaction with other features 23-8
monitored ports 23-5
monitoring ports 23-6
overview 1-10, 23-1
ports, restrictions 19-11
received traffic 23-4
sessions
configuring ingress forwarding
23-14, 23-21
creating 23-10
defined 23-3
limiting source traffic to specific VLANs 23-14
removing destination (monitoring) ports 23-12
specifying monitored ports 23-10
with ingress traffic enabled 23-13
source ports 23-5
transmitted traffic 23-5
VLAN-based 23-6
spanning tree and native VLANs 12-15
Spanning Tree Protocol
See STP
SPAN traffic
23-4
SRR
configuring
shaped weights on egress queues
28-66
shared weights on egress queues 28-67
shared weights on ingress queues 28-60
described 28-13
shaped mode 28-13
shared mode 28-13
support for 1-9
To Next Page
Loading...
