Cisco XR 12000 Command Reference

clear fabricq counters all
To clear all counters going to fabric and coming back from fabric associated with the fabric queue driver, use
the clear fabricq counters all command in administration EXEC mode.
clear fabricq counters all location node-id
Syntax Description
Identifies the node whose fabric counters you want to clear. The node-id
argument is entered in the rack/slot/module notation.
location node-id
Command Default
No default behavior or values
Command Modes
Administration EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
The fabric taskID was removed from this command.Release 3.5.0
Usage Guidelines
Task ID
OperationsTask ID
readroot-system
Examples
The following example shows how to clear all fabricq counters for the location 0/1/CPU0:
RP/0/0/CPU0:router # admin
RP/0/0/CPU0:router(admin)# clear fabricq counters all location 0/1/CPU0
Related Commands
DescriptionCommand
Displays output from the fabric statistics associated with the
fabric queue driver.
show controllers fabricq frfab, on page 105
Displays to fabric statistics associated with the fabric queue
driver.
show controllers fabricq tofab, on page 118
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
92 OL-28456-02
Fabric Management Commands
clear fabricq counters all

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English