Cisco XR 12000 Command Reference

Troubleshooting Commands
This module describes commands used for troubleshooting routers running Cisco IOS XR software.
The commands in this chapter with the cisco-support task ID are used in the Cisco IOS XR Troubleshooting
Guide for Cisco XR 12000 Series Router as part of the troubleshooting process. For information about
commands with the cisco-support task ID that are not documented in this chapter, please contact
Cisco Technical Support.
These Cisco support commands are normally reserved for use by Cisco Technical Support personnel only.
There is some risk that they may cause performance or other issues that impact products without proper
usage, and we highly recommend that you contact Cisco Technical Support prior to using any of these
commands.
Caution
•
show arp trace , page 35
•
show captured packets, page 39
•
show cfgmgr trace , page 41
•
show im database, page 43
•
show imds interface brief , page 47
•
show netio chains, page 49
•
show netio clients, page 52
•
show netio db, page 54
•
show netio idb , page 56
•
show netio media-registrations, page 61
•
show netio subblock, page 63
•
show netio trace, page 66
•
show sysdb connections, page 69
•
show sysdb trace verification location , page 71
•
show sysdb trace verification shared-plane , page 74
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 33

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English