Cisco XR 12000 Command Reference

show tech-support bundles
To automatically run show commands that display information specific to bundle debugging, use the show
tech-support bundles command in EXEC mode.
show tech-support bundles [interface type interface-path-id] [file sent-to] [background] [compressed|
uncompressed] [show-only] [trace-only] [vrf vrf-name] [location node-id| all]
Syntax Description
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
compactflasha: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
sent-to
(Optional) Specifies that the command runs in the background.background
(Optional) Displays compressed command output.compressed
(Optional) Displays the command output with no compression.uncompressed
(Optional) Collects information about a specific interface.interface
Interface type. For more information, use the question mark (?) online help
function.
type
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 149
Tech-Support Commands
show tech-support bundles

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English