Cisco XR 12000

show tech-support snmp
To automatically run show commands that display information specific to tech-support information related
to Simple Network Management Protocol (SNMP) agent, use the show tech-support snmp command in
EXEC mode.
show tech-support snmp [entitymib| ifmib] [rack] [location node-id| all] file send-to
Syntax Description
(Optional) Displays the entitymib debugging information.entitymib
(Optional) Displays the ifmib debugging information.ifmib
(Optional) Displays the list of racks.rack
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
flash: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
slot0: filename
•
slot1: filename
•
tftp: filename
send-to
(Optional) Specifies a node. The node-id argument is entered in the
rack/slot/module notation.
locationnode-id
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 289
Tech-Support Commands
show tech-support snmp