Cisco XR 12000

show tech-support qos
To automatically run show commands that display platform independent Quality of Service (QoS) debugging
information, use the show tech-support qos command in EXEC mode.
show tech-support qos pi [file send-to] [background] [compressed| uncompressed] [location node-id|
all] [rack]
Syntax Description
Collects platform independent QOS related information and saves to disk.pi
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
send-to
(Optional) Specifies that the command runs in the background.background
(Optional) Displays compressed command output.compressed
(Optional) Displays the command output with no compression.uncompressed
(Optional) Specifies a node.location
Node ID. The node-id argument is entered in the rack/slot/module notation.node-id
(Optional) Displays the list of racks.rack
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
254 OL-28456-02
Tech-Support Commands
show tech-support qos