Cisco XR 12000

show tech-support cfgmgr
To automatically run show commands that display information to gather information about the configuration
manager, use the show tech-support cfgmgr command in EXEC mode.
show tech-support cfgmgr [file send-to [background] [compressed| uncompressed]| terminal [page]]
Syntax Description
Specifies that the command output is saved to
a specified file.
file
Name of the file. The following valid options
are listed:
•
filename
•
bootflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
sent-to
(Optional) Specifies that the command runs in
the background.
background
(Optional) Displays compressed command
output.
compressed
(Optional) Displays the command output with
no compression.
uncompressed
Specifies that the command output is displayed
on the terminal.
terminal
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
156 OL-28456-02
Tech-Support Commands
show tech-support cfgmgr