Cisco XR 12000 Command Reference

(Optional) Displays compressed command output.compressed
(Optional) Displays the command output with no compression.uncompressed
(Optional) Specifies a node. The node-id argument is entered in the
rack/slot/module notation.
location node-id
Command Default
The command output is not compressed.
Passwords and other security information are not displayed.
Command Modes
Administration EXEC
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
This command generates tech-support information that is useful for Cisco Technical Support representatives
when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a
file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command
to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz
tftp://server_path.
For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service
Request' section in the Preface.
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
This command is not required during normal use of the router.Note
The following show commands run automatically when you run the show tech-support command:
•
show running-config
•
show version
•
show interfaces
•
show arm summary
•
show arm conflicts
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
128 OL-28456-02
Tech-Support Commands
show tech-support

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English