Cisco XR 12000 Command Reference

APS shows Agent: sysdb_datalist failed: ('sysdb' detected the 'warning' conditi)
--------------------------- show controller sonet * ---------------------------
Port SONET0/6/0/0:
Status: Up
Loopback: None
SECTION
LOF = 0 LOS = 1 BIP(B1) = 0
LINE
AIS = 0 RDI = 1 FEBE = 0 BIP(B2) = 0
PATH
AIS = 0 RDI = 1 FEBE = 0 BIP(B3) = 0
LOP = 0 NEWPTR = 0 PSE = 0 NSE = 0
PLM = 0 TIM = 0 UNEQ = 0
Line delays trigger: 0 ms clear: 10000 ms
Path delays trigger: 0 ms, 0 ms (configured), clear: 10000 ms
Last clearing of "show controllers SONET" counters never
Detected Alarms: None
Asserted Alarms: None
Mask for Detected->Asserted: None
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: None
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA
Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable C2_rx = 0x16 (22) C2_tx = 0x16 (22) / Scrambling Derived
S1S0(tx): 0x0 S1S0(rx): 0x0 / Framing Derived
PATH TRACE BUFFER : STABLE
Remote hostname : P11_CRS-4
Remote interface: POS0/2/0/0
Remote IP addr : 10.111.4.11
APS
No APS Group Configured
Rx(K1/K2) : 0x00/0x00
Tx(K1/K2) : 0x00/0x00
Remote Rx(K1/K2): 01/0 Remote Tx(K1/K2): 01/0
BER thresholds: SF = 10e-3 SD = 10e-6
TCA thresholds: B1 = 10e-6 B2 = 10e-6 B3 = 10e-6
Optics type: OC3 SR-1/STM1 MM
Clock source: internal (actual) internal (configured)
Rx S1: 0xf Tx S1: 0xf
Optical Power Monitoring (accuracy: +/- 1dB)
Rx power = 0.0160 mW, -18.0 dBm
Tx power = 0.0000 mW, -inf dBm
Tx laser current bias = 0.0 mA
Port SONET0/6/0/1:
Status: Up
Loopback: None
SECTION
LOF = 0 LOS = 1 BIP(B1) = 0
LINE
AIS = 0 RDI = 0 FEBE = 0 BIP(B2) = 0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 133
Tech-Support Commands
show tech-support aps

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English