Cisco XR 12000 Command Reference

405735 0x1 0x4 0x4
405744 0x40 0x1 0x0
434434 0x1 0x4 0x7
434435 0x1 0x4 0x7
434433 0x1 0x4 0x7
DLL loaded for Node = node0_RP0_CPU0
dll name version
_________________________________________________
Node State Info for Node = node0_RP0_CPU0
Type Node Nodeid Prev State Cur State LRid (PD c)
-------------------------------------------------------------------------------
LC(2) 0/1/CPU0 0x11 RUNNING_MBI(5) RUNNING_ENA(6) 0 (5242)
DRP(1) 0/4/CPU0 0x41 RUNNING_MBI(5) RUNNING_ENA(6) 0 (119))
DRP(1) 0/4/CPU1 0x42 RUNNING_MBI(5) RUNNING_ENA(6) 0 (119))
LC(2) 0/6/CPU0 0x61 RUNNING_MBI(5) RUNNING_ENA(6) 0 (5242)
RP(0) 0/RP0/CPU0 0x201 RUNNING_MBI(5) RUNNING_ENA(6) 0 (19) )
RP(0) 0/RP1/CPU0 0x211 PRESENT(1) RUNNING_ENA(6) 0 (19) )
Sw State Info for Node = node0_RP0_CPU0
-------------------------------------------------------------------------------
Type Node Nodeid PrevState CurState Red-Role/ Partner Par
(BAND) (BAND) Red-State node nae
-------------------------------------------------------------------------------
LC(2) 0/1/CPU0 0x11 INFRA FINAL Active/Down 0xffffffff
DRP(1) 0/4/CPU0 0x41 INFRA FINAL Active/Down 0xffffffff
DRP(1) 0/4/CPU1 0x42 INFRA FINAL Active/Down 0xffffffff
LC(2) 0/6/CPU0 0x61 INFRA FINAL Active/Down 0xffffffff
RP(0) 0/RP0/CPU0 0x201 INFRA FINAL Active/Down 0x211
RP(0) 0/RP1/CPU0 0x211 INFRA FINAL Standby/Down 0x201
Config Info for Node = node0_RP0_CPU0
LRd basic configuration data:
__________________________________________________
node : 0x201
lr_id : 0
lr_name : Owner
dsc node : 0x201
dsc partner node : 0x211
dlrsc node : 0x201
dlrsc partner node : 0x211
am I dSC : Yes
am I STBY dSC : NO
am I dLRSC : Yes
am I STBY dLRSC : NO
primary node : 0x201
primary node1 : 0x211
mcast addr : 0x0
mac addr : 0x01563c0b00
__________________________________________________
ADMIN CONFIG is APPLIED
__________________________________________________
lrd log file path is /net/node0_RP0_CPU0/tmp/lrd.log
------------LRD LOG START FOR NODE node0_RP0_CPU0------------
10/11 10:19:16.309 1 main: ---LRD starting---
10/11 10:19:16.325 1 main: **********LRD on Node=0x201**********
10/11 10:19:16.327 1 main: mutex init for inv_mutex DONE.
10/11 10:19:17.772 1 lrd_get_dsc: dSC = 201
10/11 10:19:17.774 1 main: We are dSC.
10/11 10:19:17.776 1 main: Registering with SSM as service provider. Once
-------------------------------------------------------------------------------
show tech-support lrd
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 205
Tech-Support Commands
show tech-support lrd

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English