Cisco XR 12000 Command Reference

Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
Use the show tbm hardwarecommand to display hardware-related ingress and egress information for the
tree bitmap.
Task ID
OperationsTask ID
readcisco-support
Examples
The following example shows the output of the show tbm hardware command:
RP/0/0/CPU0:router# show tbm hardware ipv4 unicast dual detail location 0/6/cpu0
TBM Table Type: IPv4 Unicast
------------------------------
TBM: number of pulses: 71
TBM: number of Err fix attempts: 0
No current failures
Past failures: leaf(0), mem(0), mipc(0), flush_mipc(0)
post_compact(0), pre_compact(0)
PLU Bucket Statistics:
-----------------------------
Bucket 0: 44
Bucket 1: 44
Bucket 2: 327
Bucket 3: 44
Bucket 4: 44
Bucket 5: 43
Bucket 6: 43
Bucket 7: 45
Ingress PLU Info
----------------
PLU: Num Writes : 3064
PLU: Num Copies : 2197
PLU Memory Channel Statistics:
-----------------------------
Number of compactions: 0
FCRAM0 Chan: 110 (Pages: 5, 1% used)
FCRAM1 Chan: 125 (Pages: 8, 0% used)
FCRAM2 Chan: 127 (Pages: 8, 0% used)
FCRAM3 Chan: 148 (Pages: 8, 0% used)
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 77
Troubleshooting Commands
show tbm hardware

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English