Cisco XR 12000

Examples
This example shows how to configure the compression ipv6 anchor prefix for ternary content addressable
memory (TCAM) manager module for a packet switching engine (PSE) on a specific controller or node:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# controller pse tcam location 0/2/CPU0 compression ipv6
anchor-prefix 32
Related Commands
DescriptionCommand
Displays display packet switching engine (PSE)
information in the egress or the ingress stage.
show controllers pse, on page 23
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 3
ASIC Driver Commands
controller pse tcam location