show reboot last
To display the latest crash information, use the show reboot last command in EXEC mode.
show reboot last {crashinfo| syslog| trace} location node-id
Syntax Description
Displays crash information.crashinfo
Displays information for the system logs.syslog
Displays the log for the reboot trace.trace
Specifies a node.location
Node ID. The node-id argument is entered in the rack/slot/module
notation.
node-id
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.6.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readsystem
Examples
The following sample output is from the show reboot last command:
RP/0/0/CPU0:router# show reboot last crashinfo location 0/1/CPU0
Crashinfo Timestamp: Wed Oct 10 19:04:02 2007
20071010 10:04:03
Crash Reason: Cause code 0x2000004f Cause: MBI-HELLO reloading node on receivin0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
410 OL-30353-01
Watchdog Commands
show reboot last