Cisco XR 12000 User Manual

show uidb trace
To display trace data information for the micro-interface descriptor block (IDB), use the show uidb trace
command in EXEC mode.
show uidb trace {all| errors| events| init| rsm}
Syntax Description
Displays all UIDB trace information.all
Displays information related to UIDB errors trace.errors
Displays information related to UIDB events trace.events
Displays information related to UIDB init trace.init
Displays information related to UIDB rsm trace.rsm
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Index and operation modes were not supported.Release 3.5.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readcisco-support
Examples
The following example shows the sample output from the show uidb trace command:
RP/0/0/CPU0:router sh uidb trace init loc 0/6/CPU0
--------------------------------------------------------------------------
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
86 OL-30353-01
Troubleshooting Commands
show uidb trace

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English