Cisco XR 12000

show tech-support bcdl
To automatically run show commands that display information specific to bulk content downloader (BCDL)
debugging, use the show tech-support bcdl command in EXEC mode.
show tech-support bcdl [ bcdl-group ] {terminal [page]| file send-to [background] [compressed|
uncompressed]}
Syntax Description
(Optional) Name of the BCDL group.
bcdl-group
Displays the command output on the terminal.terminal
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl-C keys to stop the command output.
page
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
disk0: filename
•
disk1: filename
•
flash: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
nvram: filename
•
rcp: filename
•
slot0: filename
•
slot1: filename
•
tftp: filename
sent-to
(Optional) Specifies that the command runs in the background.background
(Optional) Displays compressed command output.compressed
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 151
Tech-Support Commands
show tech-support bcdl