Cisco XR 12000 User Manual

show controllers fabricq queue
To display information about the hardware queues of the performance route processor chopper and assembler
FPGAs, use the show controllers fabricq queue command in administration EXEC mode.
show controllers fabricq queue [detail] [location node-id]
Syntax Description
(Optional) Displays detailed statistical information.detail
(Optional) Displays statistical information for the designated node. The node-id
argument is entered in the rack/slot/module notation.
location node-id
Command Default
Information for all performance route processors on the router is displayed
Command Modes
Administration EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show controllers fabricq queue command to display information about packet queues. Specifying
a location displays information only if that location is an RP.
This command is intended for use while performing debugging procedures.
Task ID
OperationsTask ID
read, writeroot-system
Examples
The following is detailed sample output from the show controllers fabricq queue command for the location
0/1/CPU0:
RP/0/0/CPU0:router# admin
RP/0/0/CPU0:router(admin)# show controllers fabricq queue detail location 0/1/CPU0
Location 0/1/0:
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 115
Fabric Management Commands
show controllers fabricq queue

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English