Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
Use the show tech-support cfgmgr command to gather information about the configuration manager. This
command is used to locate any issues in regards to executing configuration commands or problems. See
'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco
Technical Support contact information.
See the Cisco IOS XR Software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR Software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
OperationsTask ID
readcisco-support
Examples
The following example shows some of the show tech-support cfgmgr command output that is displayed
on the terminal:
RP/0/0/CPU0:router# show tech-support cfgmgr terminal
------------------------------------------------------------------------------
show tech-support cfgmgr
-------------------------------------------------------------------------------
-------------------------------- show platform --------------------------------
Node Type PLIM State Config State
-----------------------------------------------------------------------------
0/1/CPU0 MSC Jacket Card IOS XR RUN PWR,NSHUT,MON
0/1/0 MSC(SPA) 4XOC3-POS OK PWR,NSHUT,MON
0/1/1 MSC(SPA) 4T3E3 OK PWR,NSHUT,MON
0/1/4 MSC(SPA) 4XOC48-POS OK PWR,NSHUT,MON
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
176 OL-30353-01
Tech-Support Commands
show tech-support cfgmgr