Cisco XR 12000 User Manual

10/11 10:19:17.772 1 lrd_get_dsc: dSC = 201
10/11 10:19:17.774 1 main: We are dSC.
10/11 10:19:17.776 1 main: Registering with SSM as service provider. Once
-------------------------------------------------------------------------------
show tech-support lrd
-------------------------------------------------------------------------------
++++ lrdbg -I -1: lrd server inventory [17:21:35.603 UTC Fri Dec 18 2009] +++++
Success: node_count=8, ready=1
node=0x1(0/RSP0/CPU0), type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1
lr_name=Owner pd_card_type=0x100302, partner=0x11
node=0x11(0/RSP1/CPU0), type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=2
lr_name=Owner pd_card_type=0x100302, partner=0x1
node=0x4a0(0/FT0/SP), type=5, memsize=256, cpus=1, speed=100, sw_state=1, red_state=0
lr_name=Owner pd_card_type=0x0
node=0x4b0(0/FT1/SP), type=5, memsize=256, cpus=1, speed=100, sw_state=1, red_state=0
lr_name=Owner pd_card_type=0x0
node=0x821(0/0/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0
lr_name=Owner pd_card_type=0x30207
node=0x841(0/2/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0
lr_name=Owner pd_card_type=0x30207
node=0x851(0/3/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=0, red_state=0
lr_name=Owner pd_card_type=0x3020a
node=0xe10(0/PM1/SP), type=5, memsize=256, cpus=1, speed=100, sw_state=1, red_state=0
lr_name=Owner pd_card_type=0xf00188
---- lrdbg -I -1: lrd server inventory [17:21:36.023 UTC Fri Dec 18 2009] -----
+++ lrdbg -L local_node_lrd: local LR config info [17:21:36.215 UTC Fri Dec 18 2009] ++++
lrdbg 'i' getting CONFIG INFO
Starting lrdbg commands for node = 0/RSP0/CPU0
lrdbg: temp_node_name copied is 0/RSP0/CPU0
node_name = node0_RSP0_CPU0 chan_name = /net/node0_RSP0_CPU0/dev/lrd_local
user_nodeid=1 user_lrname = Owner
Local nodeid=1 Local lrname=Owner
User nodeid=1 User lrname = Owner User lrid=0
lrdbg: Successfully connected to channel /net/node0_RSP0_CPU0/dev/lrd_local
Starting lrdbg commands for node = node0_RSP0_CPU0 lrid = 0
DLRSC Info for Node = node0_RSP0_CPU0 Nodeid = 0x1 lrid = 0
We are the dLRSC, Backup dLRSC is 0x11
Inventory Info for Node = node0_RSP0_CPU0 lrid = 0
Success: node_count=5, ready=1
node=0x1(0/RSP0/CPU0), type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1
lr_name=Owner pd_card_type=0x100302, partner=0x11
node=0x11(0/RSP1/CPU0), type=0, memsize=256, cpus=1, speed=100, sw_state=6, red_state=2
lr_name=Owner pd_card_type=0x100302, partner=0x1
node=0x821(0/0/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0
lr_name=Owner pd_card_type=0x30207
node=0x841(0/2/CPU0), type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
242 OL-30353-01
Tech-Support Commands
show tech-support lrd

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English