Cisco XR 12000 User Manual

(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
node-id
(Optional) Specifies all locations.all
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
This command generates output to include the password for debugging information that can be useful for
Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and
Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.Note
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
OperationsTask ID
readbasic-services
Examples
The following example shows some of the show tech-support password command output that is displayed
on the terminal:
RP/0/0/CPU0:router# show tech-support password terminal page
-------------------------------------------------------------------------------
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 285
Tech-Support Commands
show tech-support password

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English