Cisco XR 12000 User Manual

This command generates PPP debugging information that can be useful for Cisco Technical Support
representatives when troubleshooting a router. See Obtaining Documentation and Submitting a Service Request
section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.Note
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
OperationsTask ID
readcisco-support
Examples
The following example shows some of the show tech-support routing ppp command output that is displayed
on the terminal:
RP/0/0/CPU0:router# show tech-support ppp
-------------------------------------------------------------------------------
show tech-support ppp
-------------------------------------------------------------------------------
----------------------------- show running-config -----------------------------
Building configuration...
!! Last configuration change at Wed Oct 10 20:05:13 2007
!
hostname P1_CRS-8
line console
exec-timeout 600 0
session-timeout 600
!
line default
exec-timeout 600 0
session-timeout 600
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
302 OL-30353-01
Tech-Support Commands
show tech-support ppp

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English