Cisco XR 12000 User Manual

(Optional) Displays compressed command output.compressed
(Optional) Displays the command output with no compression.uncompressed
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
Use the show tech-support routing ospfv3 command to run show commands that display information
specific to OSPFv3 debugging. This command generates OSPFv3 debugging information that can be useful
for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation
and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact
information.
This command is not required during normal use of the router.Note
The following show commands run automatically when you run the show tech-support routing ospfv3
command:
•
show version
•
show run router ospfv3
•
show route ipv6 ospf
•
show ospfv3
•
show ospfv3 interface
•
show ospfv3 virtual-links
•
show ospfv3 neighbor
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
332 OL-30353-01
Tech-Support Commands
show tech-support routing ospfv3

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English