Cisco XR 12000 User Manual

Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.8.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readcisco-support
readinterface
Examples
The following example shows the output of the show im database command:
RP/0/0/CPU0:router# show im database verbose interface null 0
Mon Nov 9 22:10:37.964 PST
View: OWN - Owner, L3P - Local 3rd Party, G3P - Global 3rd Party,
LDP - Local Data Plane, GDP - Global Data Plane, RED - Redundancy
Node 0/RP0/CPU0 (0x201)
Interface Null0, ifh 0x00080030 (up, 1500)
Interface flags: 0x00010097 (IFINDEX|VIRTUAL|CONFIG|VIS|DATA|CONTRO
Encapsulation: null
Interface type: IFT_NULL
Views: GDP|LDP|G3P|L3P|OWN
Control location: 0/RP0/CPU0
Owner Private: 92 bytes
Flags: <none>
State Transitions: 1
Dampening Config: NO
Shared Locks: 0
MTU default 1500
MTU ovh for bc/subif: 0/0
MTU min/max: 0/0
MTU avail/child: 0/1500
MTU actual/notified: 1500/1500
State (constraint): UP (UP)
Callback: OWN GROUP OWNER - ID 17[-]
Ctrl Flags: CFG_RDY|RDY|DNLD|INTF
Instance ID: 31
Checkpoint: 48 bytes
Resource in NetIO: TRUE
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
48 OL-30353-01
Troubleshooting Commands
show im database

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English