Citizen COMPACT CT-S310II - Page 20

CT-S310II Series Service Manual
- 18 -
Remove one “SCREW, BHT (ST), M3.0  6” that fastens “LEVER R, PLATEN LOCK” and “LEVER,
COVER OPEN-03”.
<Precaution at reassembly>
When reassembling, align the boss at “LEVER, COVER OPEN” with the hole at “LEVER R, PLATEN LOCK”.
Raise the rotating shaft a little while moving down “LEVER R, PLATEN LOCK” and align it with the slot
at “FRAME, MAIN-03” and remove the shaft through the shaft hole.
<Precaution at disassembly / reassembly>
To keep the hook at “LEVER R, PLATEN LOCK”
clear of “FRAME, MAIN”, raise the rotating shaft
slightly when removing it.
When reassembling, align the slot position with the
shaft hole and return the lever in place.
Pull “PLATE, PLATEN LOCK LEVER” out.
<Precaution at disassembly / reassembly>
When reassembling, check the orientation.
LEVER, COVER OPEN
Hole for boss
SCREW, BHT (ST), M3.0  6
Holes
Slot
Shaft
LEVER R, PLATEN LOCK
PLATE, PLATEN LOCK LEVER