CT-S310II Series Service Manual
- 19 -
Move down “LEVER L, PLATEN LOCK” and align it with the slot at “FRAME, MAIN-03” and remove it
through the shaft hole.
5. Disassembling “LEVER L & R, CUTTER RELEASE”
Disengage “SPRING, CUTTER LEVER” from the hooks at “FRAME, MAIN-03” and “LEVER R, CUTTER
RELEASE”. Move down “LEVER R, CUTTER RELEASE” and pull it out of the shaft.
Disengage “SPRING, CUTTER LEVER” from the hooks at “FRAME, MAIN-03” and “LEVER L, CUTTER
RELEASE”.
Move down “LEVER L, CUTTER RELEASE” and pull it out of the shaft.
Slot
Shaft
LEVER L, PLATEN LOCK
LEVER R, CUTTER RELEASE
Shaft
LEVER L, CUTTER RELEASE
Shaft
To Next Page
Loading...
