Citizen u680 - Page 18

123
1. Pull the crown out to position 1 and turn to align
the mode hand with CHR (chronograph mode).
2. Pull out the crown to position 2.
• The hands will move rapidly, stopping at the
reference position recorded in the watch memory.
Correct reference positions
Charge level indicator: CHN
UTC hour and minute hands: 12:00
Hour, minute and second hands: 12:00:00
24-hour hand: 12:00
3. If the reference position is correct, the check is
now complete. Press the crown back into its
normal position.
• If a position is incorrect, refer to “Adjusting the
Reference Position” (P.172) and adjust it to the
correct position.
Hour, minute and
second hands
UTC hour and
minute hands
24-hour
hand
Charge level
indicator
Mode hand