Citizen u680 - Using the Timer (TMR)

■ 15. Using the Timer (TMR)
• The timer can be set from 1 minute up to 99 minutes, in 1-minute units. After the end
of measurement, the time-up tone sounds for about 5 seconds and the watch returns to
the timer initial setting status. (Auto return function)
• Press the lower right button (A) during measurement to return to the initial set time and
start measurement again. (Flyback function)
• Radio waves cannot be received during timer measurement.
<Setting the timer>
1. Pull the crown out to position 1 and turn to
align the mode hand with TMR (timer
mode).
2. Pull the crown out to position 2 to enter the
timer setting status.
• SET is displayed in digital display 2 and
the minute display in digital display 1
flashes.
154
[Digital display 2]
Minute display flashes
[Digital display 1]
Settings
complete