166
■ 19. Using the Receive Setting (RX-S)
[Daylight saving time reception setting]
• Select whether to update the time with the daylight saving time from the received radio wave.
Refer to “Using Daylight Saving Time” (P.146) for details on daylight saving time.
AU (Auto): The time is updated with the daylight saving time from the received radio wave.
* The timing for changing to daylight saving time can vary depending on the city or
region. There may be cases when the time is not changed on the appropriate date.
* If AU is selected, when daylight saving time data is received for the daylight saving
time setting of the home city, the setting is changed to ON, and when no daylight saving
time data is received, the setting is changed to OF (off).
* When the radio wave of the area is received, daylight saving time for the corresponding
city is automatically updated to ON or OF (off). Refer to the “Received radio wave
transmitter” in “Table of UTC Time Zones” for the radio wave that is received in each
city.
mA (Manual): The time is not updated with the daylight saving time from the received radio
wave.
To Next Page
Loading...
