Citizen u680 - Using the World Time Alarm (AL-1 and 2)

■ 18. Using the World Time Alarm (AL-1 and 2)
• An alarm can be set for the set city time.
• Once a day, the alarm will sound for 15 seconds when it reaches the set time. To stop the
alarm, press button (A) or (B).
• The sound of the alarm is different for alarm 1 and alarm 2, but the setting method is the
same.
<Setting the alarm time>
1. Pull the crown out to position 1 and turn to align the mode hand
with AL-1 or AL-2 (alarm mode).
2. Pull the crown out to position 2 to enter the alarm correction
status.
• The set city is called up and ON or OF flashes.
3. Press the lower right button (A) to set alarm ON (set) or OF
(canceled).
• Press the lower right button (A) to switch between ON and OF.
• The alarm mark comes on when ON is set.
4. Each time the upper right button (B) is pressed, the display
flashes and the correction location changes.
164
Alarm
mark
Alarm ON/OF